有温度要求商品配送指南

运输有温度要求的商品时,需要在选择合适的承运人、商品包装等方面做出正确的决定。细微的温度变化和错误的包装可能会对有温度要求的商品造成损坏。其中包括巧克力、酸奶、软糖和益生菌。谨慎选择经验丰富的承运人,并妥善包装您的商品。

请遵循以下指南,确保商品在配送时处于合适的温度:

指南 描述
选择合适的承运人 承运人公司应:
  • 配备能够处理有温度要求的商品的适当设备。
  • 熟知相关法律法规。
  • 能够向全球配送您的商品(如果您有此需求)。
  • 能够提供适当的包装解决方案。
包装选择

应采用适当的冷却方式,以保持恒定的温度。选择好的隔离材料可帮助您节省冷媒。例如,对于冷却需求较低的硬质商品,隔离泡沫板或保温气泡膜包装就足够了。

对于对温度有特定要求的保健品,请使用控温包装。对于敏感货件,注意选择“有效的”控温包装。此类包装包含温控冷藏容器,采用内部电源供电。

冷媒的选择

选择合适的冷媒。干冰一般最适合冷冻,而凝胶包可将商品温度保持在 0 至 15.5 摄氏度之间。使用气泡膜包装等材料可以起到加厚填充的效果。

确保您遵守承运人的低温配送指南,包括对于干冰的使用。例如,干冰不能直接接触食品。在运输易碎商品时,应使用胶带固定凝胶包和冷媒。使用充足的填充材料(如气泡膜包装),避免商品在保温箱内移动。

快速配送 应尽量缩短配送温控商品的时间。请考虑选择最长运输时间为 30 小时的次日配送。避免节假日发货,以免商品储存在库房。
提供追踪信息 向买家发送配送消息和货件追踪信息。

 

商品包装建议

包装商品时,可以借助以下工具:

  • 新的瓦楞纸箱
  • 冷媒
  • 隔离材料(泡沫保温箱、泡沫板、保温气泡膜包装)
  • 合适的缓冲材料(气泡膜包装、包装泡沫塑料、泡沫塑料)
  • 温度监控设备

 

在包装待配送的商品时,请遵循以下建议:

包装对象 描述
防止渗漏 冷冻和液体商品必须使用防水塑料包装,然后将其装入隔离容器中。在保温箱内铺设塑料包装材料,然后将吸水材料包裹起来进行保护。
处理易腐商品 在隔离容器内使用室温凝胶包包裹商品。

 

 亚马逊官网原文详情:

Guidelines for shipping temperature-sensitive goods

Shipping temperature-sensitive goods require making proper decisions in terms of selecting the right carrier, product packaging and so on. Minor temperature variations and wrong packaging can cause damage to temperature-sensitive items. These include chocolate, yogurt, gummies and probiotics. Be careful to choose an experienced carrier and package your products appropriately.

Follow the guidelines below to keep your products at the right temperature while shipping:

Guideline Description
Selection of an appropriate carrier The carrier company should be:
  • Equipped to handle temperature-sensitive goods.
  • Knowledgeable about any legal rules and regulations.
  • Able to ship your products globally if needed.
  • Able to provide appropriate packing solutions.
Packaging selection

There should be appropriate cooling to maintain consistency in temperature. Selection of good insulation material will ensure that you need less coolant. For example, in case of hard items that require less cooling, insulated foam planks or thermal bubble wrap is sufficient.

For healthcare shipments requiring a specific temperature range, use thermo-regulated packaging. Choose "active" thermo-regulated packaging especially for sensitive shipments. This type of packaging contains a thermostat-controlled refrigerated container powered by an internal power source.

Coolant selection

Select an appropriate coolant. Dry ice is considered best for freezing, while gel packs keep item temperature between 32 and 60 degrees Fahrenheit. Maintain appropriate padding by using material such bubble wrap, etc.

Ensure that you comply with your carrier’s Cold Ship guidelines, including on use of dry ice. For example, dry ice should not come into direct contact with any food items. Secure gel packs and coolants with tape while shipping delicate goods. Include ample padding material such as bubble wrap to prevent movement within the cooler.

Fast shipping The transit time for shipping the temperature-controlled goods should be minimized. Consider overnight shipping with a maximum transit time of 30 hours. Avoid shipping on holidays to avoid product storage in a warehouse.
Provide tracking information Send delivery message and shipment-tracking information to your customers.

 

Recommendations for product packaging

While packing your product, here are some items that can assist with your shipment:

  • A new corrugated box
  • Coolant
  • Insulation material (foam cooler, foam planks, thermal bubble wrap)
  • Appropriate cushioning (bubble wrap, packing peanuts, foam)
  • Temperature-monitoring device

 

Follow these recommendations while packaging your products for shipping:

Recommendations for... Description
Leakage prevention Frozen and liquid items must be enclosed in watertight plastic before packing them in an insulated container. Arrange the cooler with plastic and then enclose the absorbent for protection.
Handling perishable goods Surround your goods with room-temperature gel packs within an insulated container.
 

 文章来源:亚马逊官方网站