轻小商品预处理和包装指南

包装检查清单

  • 所有 ASIN 均符合计划资格要求并已成功添加(请参阅亚马逊物流轻小商品库存报告)。

  • 同一 ASIN 的商品使用透明塑料袋、制造商/卖家包装箱捆绑在一起。

  • 每个塑料袋、外部包装箱或收缩膜包装的捆绑商品均标注了可售商品的总数量。

  • 每件商品均粘贴有可扫描的制造商条形码或亚马逊条形码。

    • UPC 或 EAN 条形码在扫描时必须链接到单个 ASIN。

    • 如果商品未粘贴有可扫描的 UPC 或 EAN,或 UPC/EAN 链接至多个 ASIN,请使用亚马流 FNSKU。

  • 玻璃和尖锐物品必须安全包装,以防破碎或损伤。有关更多信息,请参阅包装易碎的玻璃陶瓷制品和包装尖锐商品。

  • 轻小商品计划仅使用聚乙烯塑料袋和 Jiffy 塑料袋。薯片和玻璃等易压碎商品应妥善预处理和包装,以免它们在配送时发生挤压或破碎。亚马逊运营中心不会接收破碎或压碎的商品。这些商品将被移除或弃置,费用由您自行承担。

货件检查清单

  • 在每个货件中,每个 SKU 必须至少包含 24 件商品。

  • 货件内容与入库计划相符。

  • 货件中不包含危险物品(危险品)或有温度要求、易融或易压碎的商品。

  • 货件箱任何一侧的长度均不得超过 25 英寸,且重量不得超过 50 磅。

  • 如果适用,托拍采用单堆叠和前部装载形式,且每个拖车的滑托不超过 22 个。

成功提示

  • 请勿寄送具有冗余库存的货件。有关更多信息,请参阅管理冗余库存。

  • 仅将货件寄送至货件标签上指定的运营中心。

有用视频

  • 货件安全要求

  • 库存预处理要求

  • 货件信息准确性

独特的计划要求

  • 每一商品重量小于或等于 10 盎司,尺寸小于或等于 16x9x4 英寸。

  • 在每个货件中,每个 ASIN 必须至少包含 24 件商品。

  • 货件箱中同一 ASIN 的所有商品都必须使用透明塑料袋、制造商或卖家原厂包装(例如:装箱或用收缩膜包装)或将同一 ASIN 的商品组合到一起的其他方式捆绑在一起。

  • 在商品 ASIN 相同的每个袋子或包装外侧,必须明确标注可售商品的总数。

  • 每件独立可售商品都必须粘贴有可扫描的 UPC 或 EAN 制造商条形码。如果没有可用条形码,请在货件创建期间打印并粘贴亚马逊条形码。

  • 如果适用,托拍必须采用单堆叠形式,且每个拖车的滑托不超过 22 个。

  • 亚马逊物流轻小商品计划不提供预处理或贴标服务。对于未正确预处理的商品,我们需要将其移除或弃置,费用由您自行承担。有关更多信息,请参阅移除库存(概览)。

  • 亚马逊物流轻小商品计划不接受危险物品(危险品)、易压碎商品或有温度要求的商品。

  • 亚马逊物流轻小商品计划货件不符合亚马逊物流库存配置服务的要求。

示例 1: 透明塑料袋中的商品

合适的包装

  • 货件箱中的所有商品都必须位于透明塑料袋中。

  • 每个袋子必须标注可售商品的总数量。

  • 袋子中的每件独立可售商品都粘贴有制造商提供的可扫描 UPC 或 EAN 条形码。如果没有条形码,请粘贴亚马逊条形码。


正确包装

 

错误包装

以下不是透明塑料袋。

没有透明塑料袋或外部原厂包装。没有给出可售商品总数量的标签。

示例 2: 制造商或卖家包装箱中的商品

合适的包装

  • 货件箱中的所有商品必须位于包装箱内。

  • 每个外装运箱必须标注可售商品的总数量。

  • 袋子中的每件可售商品都粘贴有制造商提供的可扫描 UPC 或 EAN 条形码。如果没有条形码,则必须粘贴亚马逊条形码。


正确包装

 

错误包装

在以下情况中,外装运箱粘贴有可扫描的条形码,但没有涉及可售商品总数量的条形码标签。





示例 3: 使用收缩膜包装的商品

合适的包装

  • 货件箱中的所有商品都正确使用收缩膜包装。

  • 捆绑商品中每一个收缩膜包装必须标注可售商品的总数量。

  • 袋子中的每件独立可售商品都粘贴有制造商提供的可扫描 UPC 或 EAN 条形码。如果没有条形码,请粘贴亚马逊条形码。


正确包装

 

示例 4: 一个箱子内有多个 ASIN

当每一 ASIN 都满足以下所有要求时,您就可在一个货件箱内配送多个 ASIN

  • 货件箱中同一 ASIN 的所有商品必须使用透明塑料袋或制造商/卖家包装箱捆绑在一起(例如装箱或用收缩膜包装)。

  • 在每个相同 ASIN 的袋子/包装外,必须明确标注可售商品的总数量。

  • 袋子中的每件独立可售商品都粘贴有制造商提供的可扫描 UPC 或 EAN 条形码。如果没有条形码,请粘贴亚马逊条形码。


正确包装


亚马逊官网原文详情:   

Small and Light prep and packaging guide

Packaging checklist

  • All ASINs meet program eligibility requirements and have been successfully added (See FBA Small & Light Inventory report).

  • Same-ASIN units are bundled together in clear plastic bags, manufacturer, or seller case packs.

  • Each bag, outer case, or shrink-wrapped bundle has a label with the total quantity of sellable units.

  • Each individual unit has a scannable manufacturer barcode or Amazon barcode.

    • UPC or EAN barcodes must link to a single ASIN when scanned.

    • Use an Amazon FNSKU if the unit does not have a scannable UPC or EAN, or if the UPC/EAN links to more than one ASIN.

  • Glass and sharp objects are safely packaged to prevent breakage or injury. For more information, see Packaging glass ceramic breakable and fragile units and Packaging sharp units.

  • Small and Light only uses poly bags and Jiffy bags. Crushable items such as potato chips and glass should be properly prepped and packaged so they do not crush or break when shipped. Broken or crushed items will not be received at the fulfillment center. They will be removed or disposed of at your expense.

Shipment checklist

  • A minimum of 24 units per SKU must be sent in each shipment.

  • Shipment contents match the shipping plan.

  • Shipment does not contain dangerous goods (hazmat) or items that are temperature-sensitive, meltable, or crushable.

  • The shipping box does not exceed 25 inches on any side, and does not weigh more than 50 lb.

  • If applicable, pallets are single-stacked and front-loaded with no more than 22 skids per trailer.

Tips for success

  • Do not send shipments with excess inventory. For more information, see Manage Excess Inventory.

  • Only send shipments to the fulfillment center specified on the shipping label.

Helpful videos

  • Shipment Safety Requirements

  • Inventory Prep Requirements

  • Shipment Information Accuracy

Unique program requirements

  • Each unit weighs less than or equal to 10 ounces, and has dimensions less than or equal to 16x9x4 inches.

  • A minimum of 24 units per ASIN must be sent in each shipment.

  • All same-ASIN units within a shipping box must be bundled together using a clear plastic bag, a manufacturer or seller case pack (i.e., boxed or shrink-wrapped), or other means of grouping your same-ASIN units together.

  • On the outside of each same-ASIN bag or pack, the total quantity of sellable units must be clearly labeled.

  • Each individual sellable unit must have a scannable UPC or EAN manufacturer barcode. If no barcode is available, then print and apply an Amazon barcode during shipment creation.

  • If applicable, pallets must be single stacked, and front loaded with no more than 22 skids per trailer.

  • FBA Small and Light does not provide prep or labeling services. Items not properly prepped will need to be removed or disposed of at your expense. For more information, see Remove inventory (overview).

  • FBA Small and Light cannot accept dangerous goods (hazmat), crushable, or temperature sensitive items.

  • FBA Small and Light shipments are not eligible for FBA Inventory Placement Service.

Example 1: Units in clear plastic bags

Proper packaging

  • All units in the shipping box are in clear plastic bags.

  • Each bag is labeled with the total quantity of sellable units.

  • Each individual sellable unit within a bag has a scannable UPC or EAN barcode from the manufacturer. If no barcode is present, please apply an Amazon barcode.


Correct packaging

Incorrect packaging

The following is not a clear plastic bag.

There is no clear plastic bag or outer case pack. There is no label for total quantity of sellable units.

Example 2: Units in manufacturer or seller case packs

Proper packaging

  • All units within the shipping box are in case packs.

  • Each outer case is labeled with the total quantity of sellable units.

  • Each sellable unit in a bag has a scannable UPC or EAN barcode from the manufacturer. If no barcode is present, you must apply an Amazon barcode.


Correct packaging

Incorrect packaging

In the following, the outer case has a scannable barcode, but there is no barcode label for total quantity of sellable units.


Example 3: Units that are shrink-wrapped

Proper packaging

  • All units within the shipping box are properly shrink-wrapped.

  • Each shrink-wrapped bundle is labeled with the total quantity of sellable units.

  • Each individual sellable unit in a bag has a scannable UPC or EAN barcode from the manufacturer. If no barcode is present, please apply an Amazon barcode.


Correct packaging

Example 4: Multiple ASINs in one box

When each ASIN meets all the requirements below, you can ship multiple ASINs in one shipping box

  • All same-ASIN units in the shipping box are bundled together in clear plastic bags or manufacturer / seller case packs (i.e, boxed or shrink-wrapped).

  • On the outside of each same-ASIN bag or pack, the total quantity of sellable units is clearly labeled.

  • Each, individual sellable unit in a bag has a scannable UPC or EAN barcode from the manufacturer. If no barcode is present, apply an Amazon barcode.


Correct packaging


文章来源:亚马逊官方网站